Project guide
Decorative concrete patios
Turn a plain slab into an outdoor room with stamped stone, borders and color.

The patio is where most people start with decorative concrete, and it's where the finish makes the biggest difference. A stamped patio with a contrasting border can look like natural flagstone for a fraction of the cost of stone.
Best finishes for patios
- Stamped concrete for new patios: slate, flagstone and ashlar patterns are the most popular.
- A stamped overlay if you already have a sound plain patio.
- Stain for covered patios and a softer, color-washed look.
Design tips
- Add a border. A smooth or contrasting band around the edge, like our photos, frames the patio and makes it look custom.
- Go bigger than you think. Plan at least 12 by 12 feet for a table and chairs; 16 by 20 feet or more for a seating area plus dining.
- Slope it away from the house. About 1/8 to 1/4 inch per foot so water drains off.
- Match the house. Pull colors from your brick, stone or siding.
- Plan for shade. Darker colors get hot in full sun. Lighter tones stay cooler.
Cost example
A 300-square-foot stamped patio at $12 to $25 per square foot comes to about $3,600 to $7,500, before extras like steps, seat walls or lighting. Try your own numbers in the cost calculator.
Updated November 19, 2026
Finishes for patios

Stamped concrete
Fresh concrete pressed with patterned mats to look like slate, stone, brick or wood.
About $12 to $25 per sq ft
Overlays & resurfacing
A thin new decorative layer over sound old concrete, without tearing it out.
About $4 to $20 per sq ft
Stained concrete
Acid or water-based stain soaked into concrete for rich, marbled color.
About $3 to $14 per sq ft