Finish guide
Overlays & resurfacing
A thin new decorative layer over sound old concrete, without tearing it out.
- Best for
- Worn patios, pool decks, porches and driveways that are still structurally sound
- Typical installed cost
- $4 to $20 per sq ft

A concrete overlay is a thin layer of polymer-modified cement applied over existing concrete. It can be troweled smooth, sprayed into a knockdown texture, stamped with patterns, or stained. Think of it as a facelift: you get a new decorative surface without the cost and mess of demolishing the old slab.
The catch: the slab underneath must be sound. Overlays fix the surface, not structural problems. Heaving, sinking or badly broken concrete needs repair or replacement first.
Types of overlays
- Skim coat / microtopping: very thin and smooth, a modern look for floors and countertops.
- Spray-down or knockdown: textured, cooler underfoot. A favorite for pool decks.
- Stamped overlay: thicker layer (about 1/4 to 3/4 inch) that can be stamped like new concrete.
- Self-leveling overlay: flows out flat, often used indoors under stain or polish.
Pros and cons
Pros
- Avoids demolition and haul-off
- Big visual change in a few days
- Can add texture for better grip
- Works on many surfaces, indoors and out
Cons
- Won't fix cracks that keep moving
- Bond failure if prep is rushed
- Thin layers can show wear in heavy traffic
- Quality varies widely between products and crews
What it costs
Expect about $4 to $20 per square foot. Simple textured or skim coats sit at the low end; stamped overlays with multiple colors sit at the high end. Repairs to the old slab are extra.
Updated November 19, 2026