Finish guide
Epoxy & floor coatings
Tough resin coatings, from solid colors to decorative flake and metallic looks.
- Best for
- Garages, workshops, basements and commercial floors
- Typical installed cost
- $4 to $12 per sq ft

Floor coatings are a liquid resin system rolled or squeegeed onto prepared concrete, where they cure into a hard, seamless surface. Epoxy is the best known. Polyurea and polyaspartic coatings cure faster and handle sunlight better, which is why many garage-floor companies now use them for the top coat.
Decorative options include solid colors, a full broadcast of colored flakes (the most popular garage look), quartz for extra grip, and metallic systems that swirl like marble.
How it's done
- Prep. The concrete is diamond-ground or shot-blasted so the coating can bond. This step decides whether the floor lasts.
- Repair. Cracks and pits are filled.
- Moisture check. Moisture coming up through the slab is the top cause of peeling. Good installers test for it.
- Base coat. The first coat goes down, often with flakes or quartz broadcast into it.
- Top coat. A clear top coat seals everything and sets the slip resistance.
Pros and cons
Pros
- Resists oil, chemicals and stains
- Seamless and easy to clean
- Huge range of colors and looks
- Hides minor surface wear
Cons
- Can peel if the prep or moisture check is skipped
- Some epoxies yellow in sunlight
- Can be slippery without grit
- Cheap DIY kits rarely last like pro systems
What it costs
Professionally installed coatings commonly run about $4 to $12 per square foot, depending on the system, flake or metallic finish, and how much prep and repair the slab needs. A typical two-car garage is about 400 to 500 square feet.
Updated November 19, 2026