Finish guide
Polished concrete
Concrete ground with diamond tooling to a smooth, glossy, low-maintenance floor.
- Best for
- Modern homes, basements, showrooms, offices and shops
- Typical installed cost
- $3 to $16 per sq ft

Polished concrete is made by grinding the slab with progressively finer diamond tooling, much like sanding wood, then treating it with a densifier that hardens the surface. The result is a smooth floor that reflects light, from a soft satin to a mirror-like gloss.
How deep the grind goes decides the look. A light grind keeps the cream surface; a deeper grind exposes fine sand (salt-and-pepper); the deepest grind exposes larger stones (aggregate), like the floor in our photo.
How it's done
- Assess the slab. Flatness, cracks and any coatings are checked. Polishing shows every flaw, so condition matters.
- Grind. Coarse diamonds open the surface to the chosen aggregate exposure.
- Fill and densify. Pinholes and cracks are filled; a densifier soaks in and hardens the concrete.
- Hone and polish. Finer and finer diamonds bring up the shine to the chosen gloss level.
- Optional color. Dyes can be added between steps for color.
- Guard. A thin stain-guard is applied and burnished in.
Pros and cons
Pros
- Very durable and long-lasting
- No coating to peel; easy to mop clean
- Brightens a room by reflecting light
- Low lifetime cost compared with tile or coatings
Cons
- Shows cracks and repairs in the slab
- Not a fit for every old or damaged slab
- Hard underfoot; can echo
- Grinding is loud and dusty work
What it costs
Basic polished floors often start around $3 to $8 per square foot. High-gloss finishes, full aggregate exposure, dye colors or slab repairs push costs toward $12 to $16. Larger, open areas cost less per foot than small rooms with lots of edges.
Updated November 19, 2026