Finish guide
Stamped concrete
Fresh concrete pressed with patterned mats to look like slate, stone, brick or wood.
- Best for
- Patios, pool decks, walkways, driveway borders and entries
- Typical installed cost
- $12 to $25 per sq ft

Stamped concrete is regular poured concrete with a texture pressed into the surface while it's still soft. Crews pour and level the slab, add color, then lay flexible polyurethane mats across it and tamp them down to leave the look of flagstone, ashlar slate, cobblestone, brick or wood planks. After it cures, the surface is cleaned and sealed.
It's the most popular decorative finish for outdoor spaces because it gives you the look of natural stone or pavers in one continuous slab, usually for less money and with no joints for weeds to grow through.
How it's done
- Site prep and forms. The area is excavated, the base is compacted and forms are set to the finished shape and slope.
- Pour and screed. Concrete goes in, usually 4 inches thick for patios and walkways, thicker with more reinforcement for driveways.
- Base color. Color is mixed into the concrete (integral color) or broadcast across the surface as a color hardener.
- Release agent. A powder or liquid release goes down so the mats don't stick. Tinted release also adds a second, darker accent color in the low spots.
- Stamping. The crew places mats in sequence and tamps them in. Timing is everything: too wet and the pattern slumps, too dry and it won't take.
- Control joints. Joints are cut to control cracking, ideally hidden in the pattern's grout lines.
- Wash and seal. Once cured, excess release is washed off and a sealer brings out the color.
Pros and cons
Pros
- Looks like stone or pavers at a lower cost
- One solid slab: no shifting pavers or weeds
- Huge choice of patterns and colors
- Durable when properly installed and sealed
Cons
- Needs resealing every 2 to 3 years
- Can be slippery when wet unless an anti-slip additive is used in the sealer
- Cracks are hard to hide and repairs are hard to color-match
- Quality depends heavily on the crew's skill and timing
What it costs
Expect roughly $12 to $25 per square foot installed for a standard pattern in one or two colors, and more for multi-color work, custom borders or hand-detailed edges. Driveways usually cost more per foot than patios because they need a thicker, reinforced slab. Use the cost calculator to rough out your project.
Tips before you hire
- Ask to see the actual mats and color samples, and photos of jobs that are at least two years old.
- Ask whether they'll add an anti-slip additive to the sealer, especially around pools and steps.
- Ask where the control joints will go and how they'll hide them in the pattern.
Updated November 19, 2026