Decorative concrete glossary
The words contractors use, explained simply.
- Acid stain
- A chemical stain that reacts with lime in concrete to create translucent, marbled color.
- Aggregate
- The sand, gravel and stone mixed into concrete. Polishing can expose it for a speckled look.
- Antiquing release
- A tinted release agent that leaves a darker accent color in the low spots of a stamped pattern.
- Ashlar slate
- A popular stamp pattern of rectangular, slate-textured stones.
- Broom finish
- A simple textured finish made by dragging a broom across fresh concrete for traction.
- Color hardener
- A dry shake of pigment and cement broadcast onto fresh concrete for strong, durable surface color.
- Control joint
- A planned groove cut into concrete so cracks form along a straight line instead of randomly.
- Densifier
- A liquid used in polishing that soaks into concrete and hardens the surface.
- Exposed aggregate
- A finish where the top layer of cement is removed to reveal the stones underneath.
- Integral color
- Pigment mixed into the whole batch of concrete so the color runs all the way through.
- Overlay
- A thin layer of polymer-modified cement applied over existing concrete to give it a new surface.
- Polyaspartic
- A fast-curing, UV-stable floor coating, often used as a top coat on garage floors.
- Release agent
- Powder or liquid that keeps stamp mats from sticking to fresh concrete.
- Saw cut
- A decorative or control line cut into hardened concrete with a saw.
- Sealer
- A clear protective coating that guards color and blocks stains and water.
- Spray-down / knockdown
- A textured overlay sprayed on and lightly troweled flat, common on pool decks.
- Stamp mat
- A flexible polyurethane mat used to press patterns into fresh concrete.
- Texture skin
- A thin, flexible mat that adds stone texture without a joint pattern.